Battery Projectile / Burning Test Chamber

DGBELL’s battery projectile / burning test chamber is suitable for testing the flame resistance and flammability of various consumer batteries, such as mobile phones and notebook computers.

Share:

Application

DGBELL’s battery projectile / burning test chamber is suitable for testing the flame resistance and flammability of various consumer batteries, such as mobile phones and notebook computers. Easy to operate, safe and reliable, it is an ideal battery burning test equipment.

Related Standard Test Requirements

  • UL 1642

 Main Technical Parameters

ModelBE-8105
StructureAll-in-one structure, the door uses explosion-proof lock and explosion-proof chain
BurnerBunsen burner with inner diameter of 0.375 inch (9.5mm) and length approx. 100mm
Flame Application Time99H 59M 59S
Flame Height*10~75±2mm(Adjustable)
*Mesh should be placed approx. 38mm above the flame (GB31241-2014)
Test Rod Diameter1/4inch(6.35mm)× 14inch(355.6mm)
Octagon Shape Stainless Steel Mesh EnclosureDistance between each parallel sides: 24 inches (610mm)
Height: 14 inches (305mm),
Angle iron : spec. 12.7mmX12.7mm
Mesh Top CoverSquare shape with length approx. 650mm
Test Aluminum Mesh Specification0.010inch (0.25mm) 16 grit x16 grit
Test Round Hole Surface Diameter102mm
Ignition DeviceAutomatic ignition
Display ModePLC touch + Remote control
Observation window390x360mm (20mm thick explosion-proof glass, install explosion-proof stainless steel mesh)
Control MethodRemote control, automatic control through the entire test.
Combustion Gas RequirementsHigh purity liquefied petroleum gas. (Prepared by user)
Data OutputTest data can be output by USB flash disk directly .
Safety ProtectionExplosion-proof pressure relief device, smoke exhaust device, fire extinguishing system, electronic door lock system, safety stop switch
OptionsVideo monitoring system
en_USEnglish