Battery Washing Test Chamber

DGBELL newly battery washing tester consisting of test chamber and washing chamber under test chamber. Moreover, it motorized rotary propeller mounted inside of test chamber and on the internal wall of test chamber, the drying system is mounted.

Share:

Application

DGBELL’s battery washing test chamber consisting of test chamber and washing chamber under the test chamber. Moreover, it motorized rotary propeller mounted inside of the test chamber and on the internal wall of test chamber, the drying system is mounted. This battery washing tester is designed as a lifting structure chamber which forms a sealed casing when the washing chamber rises to the upper edge of the test chamber. The control panel and water tank are designed on the rack, and the washing chamber is connected to the water tank. Reasonable test chamber structure shortens the test period and improves test accuracy.

The schematic diagram of the test device for the battery washing tester is as follows:

Performance parameters

ModelBE-8109
InstructionAll-in-one structure, install explosion-proof lock + explosion-proof door
Testing Rotary Plate Diameter500±10MM
Inner Barrel Diameter650MM
Inner Barrel Depth550MM
Plate Rotation Speed Range1—900rpm/min controllable
Speed Accuracy0.01
Control SystemPLC touch control + Remote control
Control MethodProgrammable, fully automatic testing.Returning to origin – adding water – raising – heating – dropping – soaking – stirring – draining – dewatering – de-cylindering – drying – complete.
Servo MotorJapan Panasonic servo motor
Time Setting0-999 hours (Adjustable)
Liquid Temperature RangeRT+10℃ ~ 80℃(controllable)
Water Temperature Deviation±2℃
Water Temperature Accuracy0.1℃
Water Temperature Heating RateRT ~ 45℃ ,Less than 40min
Drying Temperature RangeRT+10℃ ~ 80℃(controllable)
Wind Temperature Deviation±2℃
Wind Temperature Display Accuracy0.1℃
Wind Temperature Heating RateRT ~ 45℃ ,Less than 40min
Water Control MethodAutomatic water pump
Heating Control SystemHeating tube: water temperature control heating and thermostat control heating control separately
Transmission SystemDriven by motor, screw drive control lift
Alarm DeviceTri-color warning light
Observation Window370X350MM,Three-layers vacuum tempered glass
Internal MaterialSUS 316# ,Stainless steel
External Material1.5mm thickness Cold plate paint baked coating
Power SupplyAC 380V /14.0KW
Total DimensionW1150 X H1780 X D1550 MM
USB InterfaceWith USB interface, test data can be output
en_USEnglish