Shock Test System for Lithium Battery Test

Bell’s shock test System used to measure and determine the impact resistance of a product or package. It is mainly used to evaluate the reliability of the function and the integrity of the structure of the test product under an impact environment. Suitable for impact testing of aerospace, aerospace, marine, military, consumer electronics, automotive, household appliances and display equipment.

 

Share:

Application

DGBELL’s Shock Test System used to measure and determine the impact resistance of a product or package. It is mainly used to evaluate the reliability of the function and the integrity of the structure of the test product under an impact environment. Suitable for impact testing of aerospace, aerospace, marine, military, consumer electronics, automotive, household appliances and display equipment.

Test requirements

  • IEC 62133
  • UL 1642
  • UN 38.3

Main Technical Parameters

ModelBE-SKT-10
Specified Load10 kg, (Including fixtures and test specimen)
Bench DimensionL200×W200 mm
Pulse WaveHalf sinusoidal wave
Shock Impact Peak Acceleration150~15000 m/s2
Pulse Duration0.6~20ms
External DimensionL1000mm×W500mm×H2700mm
Total Weight1500 kg
Impact FormFree fall
Max. Drop Height1500mm
Power SupplyThree phase 380V,50/60 Hz
Hydraulic SourceWith the equipment
Ambient ConditionTemperature0~40℃
Humidity(25℃)<85%
Reliability1.Average failure-free accumulation working time ≥ 1000h;
2.The half-sine waveform generator has no less than 5000 consecutive impacts;
3.The half-sine waveform generators have a storage time of no less than 5 years in a clean, room temperature environment.
Testing SystemShock DAQ, Impact, collision measurement control system
Usage StandardGJB150、GJB360、GJB548、GB/T2423、GJB1217、JJG497、GIEC68-2-27
Testing StandardAcceleration amplitude, pulse width, uniformity, and lateral motion ratio meet the requirements of JJG541-88.
en_USEnglish