Traction Battery Drop Tester

Traction Battery Drop Tester simulates the battery from a height of 1m ~ 1.5m, falling to the concrete floor (or 30mm thick hardwood), each battery to any direction (face, corner, edge) free fall 3 times, the battery should not catch fire, not explode.

Share:

Traction Battery Drop Tester Relevant standards requirements

Single Storage Cell Safety Test

Drop testing steps

  1. Charge the single storage cell according to 6.1.3
  2. Drop the positive-negative terminals of the cell from the height of 1.5m to the concrete floor;
  3. Observe for 1h

 

Battery Module Safety Test

  1. Charge the battery module according to the standard 6.1.4
  2. Drop the positive-negative terminals of the battery from the height of 1.2m to the concrete floor
  3. Observe for 1h

 

Traction Battery Drop Tester Standard

  • UL 2580

 

Technical Parameters

ModelBF-F-315ST
Drop Height300~1500mm (Adjustable)
Display ModeDigital display, adjustable
Max. Load0~70KG (can be customized 100KG, 200KG, etc.)
Testing MethodFace, edge, corner dropping
Control MethodMachine & Controller remote control independent
Drop & Lifting MethodElectric
Specimen Max. SizeW800 X D600 X H800mm (Customized available)
Overall DimensionW1200 X D1700 X H2400mm
Drop Floor MaterialStandard Steel Plate (Optional: Cement plate, marble plate, wood plate)
Power SourceAC 380V 50HZ  0.75KW
Machine WeightApprox 750KG
Safety Alarm DeviceElectric leakage, over-temperature, over-voltage, overloading, over-current protection, abnormal sound light alarm, smoke alarm, etc.
Safety ProtectionExplosion-proof fence surrounded

 

en_USEnglish