Double-deck High Temperature Aging Test Chamber

Bell’s Double-deck High Temperature Aging Test Chamber is widely used for the aging test for electronic products, solar panel, plastic products, especially for battery temperature aging test.

Share:

Standard

  • IEC 60068-2-2:2007

Performance parameters

ModelBTT-D2-216ABTT-D2-360A
Single Cabinet Inner DimensionW600 X D600 X H600 MMW1000 X D600 X H600 MM
External DimensionW1340*D1085*H1765mm
Structure ModeAn integral structure with upper and lower cabinets.
Temperature RangeRoom temperature +10℃-+150℃
Temperature Fluctuation±0.3℃
Heating TimeRT+10~+100°C for about 10 minutes
Temperature Uniformity≤±2℃ (No load, constant state)
Observation WindowExplosion-proof glass with explosion-proof membrane
Cooling ModeAir cooling
Controlling ModeTouch screen programmable control PLC, with USB interface, with RJ485 .interface can be connected to computer control, special network control software, convenient remote monitoring, data acquisition
Inner Chamber Material1.0MM thick SUS304# mirror stainless steel, sprayed with Teflon insulation
External Chamber Material1.2 MM thick Galvanized sheet, dusting pained with high temperature plasticized coating.
Power SupplyAC380V  50HZAC380V 50HZ
Safety ProtectionAutomatic explosion-proof pressure relief device, explosion-proof chain, tri-color light alarm device, remote control, smoke exhaust device, fire extinguishing device, etc.
Cable Port¢100mm each opening one with soft silicone plug and stainless steel cover
Extension FunctionProvide communication protocol, able to accompanied use with charge and discharge machine
en_USEnglish